Removing The Battery From Gt2708, Gt2705, Gt2710 Or Gt2508 - Mitsubishi Electric GOT2000 Series User Manual

The GT25 models have no battery extension cable regardless of the hardware version.
For how to check the hardware version, refer to the following.
➠
Step 4.
Push and close the battery cover until it clicks.
6.10.2

Removing the battery from GT2708, GT2705, GT2710 or GT2508

The following shows the battery removal procedure, taking GT2708 as an example.
Step 1.
Make sure that the GOT power is off.
Step 2.
The battery is stored inside the SD card cover on the side of the GOT.
Open the SD card cover as shown in the following figure.
Step 3.
After removing the battery from the battery holder of the GOT, unplug the battery connector from the GOT
connector.
6 - 48
6.10 Removing the Battery
11.7 Confirming of Versions and Conforming Standards
Battery
Battery cover
Battery SD card cover
Connector
Connector SD card cover
Black cable
Red cable