Gt21 - Mitsubishi Electric GOT2000 Series User Manual

6.6.2

GT21

The following shows an installation example for the horizontal direction.
For the vertical installation, install the GOT so that the power supply terminal, which is located on the GOT rear face, is at
the lower side.
➠ 4. PART NAMES AND SETTINGS
■1. GT21
Step 1.
Install a packing to the packing installation groove on the GOT rear face.
Step 2.
Insert the GOT rear face into the panel opening. (The following shows an example of the horizontal
installation.)
POINT POINT POINT
Cautions for an installation panel
Use a panel that has no warpage, damage, and unevenness on its surface. Failure to do so may
not result in waterproof effect.
Determine the panel thickness considering the panel strength.
(For example, even though the panel has thickness within the range, the strength may be
insufficient depending on the material and size. Insufficient panel strength may result in warpage
depending on the installation position of the GOT and other devices.)
Packing
Enlarge
Packing
Packing
installation groove
Panel opening
6.6 Installing the GOT
6
6 - 29