Table of Contents
Advertisement
Owners manual
10.3 Armrests Type "L"
10.3.1 Flipping Armrest Back
1.
Pull the armrest towards the back of wheelchair
10.3.2 Armrest Height Adjustment
Remove screw A with a 10 mm wrench.
1.
2.
Pull up or down on the armrest.
3.
When the desired height is reached,
put back screw A in the right hole
4.
Tighten.
After any adjustments, make sure all attaching hardware is tightened
securely - otherwise injury or damage may occur.
Never operate or replace flip-back armrest when wheelchair is folded -
otherwise injury or damage may result. Make sure the armrest is securely
locked into arm socket and armrest release button locks into place
before using.
Always lift the wheelchair by gripping the frame. Never lift the wheelchair
by the removable armrests or the footrests.
31
ENGLISH
A
Figure 31: Type "L" Armrest
Revision 5
December 2015
Advertisement
Table of Contents
