Unfolding The Wheelchair - Physipro XL5 Owner's Manual

Up to 350 lb weight limit
Hide thumbs Also See for XL5:
Table of Contents

Advertisement

Owners manual

16.2 Unfolding the Wheelchair

1.
Place your hand on the top of the seat rail
2.
Ensure your fingers and thumbs are pointed inside of the wheelchair
3.
Press downward on the top of the seat rail until the wheelchair is fully
open and the seat rails fully seated.
4.
Install Stabilizer Bar. Refer to installing the stabilizer bar in section 8.6 if
installed.
5.
Reinstall all postural components
Note: Ensure that the footrest is locked prior to use
Make sure your thumb and fingers point to the inside of the wheelchair.
Never wrap your thumb or fingers under the seat rail.
Make sure the wheelchair is completely unfolded and the seat rails are
anchored properly berfore using the wheelchair.
Figure 45 : To Unfold the Wheelchair
41
ENGLISH
Revision 5
December 2015

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xl5 ci

Table of Contents