Folding Backrest (Optional); Transit Use - Physipro XL5 Owner's Manual

Up to 350 lb weight limit
Hide thumbs Also See for XL5:
Table of Contents

Advertisement

ENGLISH

16.3 Folding Backrest (Optional)

This option allows you to completely
fold the backrest of the manual
wheelchair. This operation facilitates
transportation. To do so, lift lever A
and push the push handles forward.

16.4 Transit use

The wheelchair is equipped with
securement points which are used
to provide increased stability during
transportation.
The figure below shows the locations of
the wheelchair's securement points.
Two anchorage rings in the back
If the wheelchair is used for transport, it must be used in a forward-facing seating position.
Only use the provided securement points during transportation. Never fix any anchor
cable on any other part of the wheelchair. Furthermore, you have to install the cables as
recommended by Transport Canada for maximum security.
The anchorage rings of the wheelchair do not substitute for the restraining system certified
by Transport Canada.
PHYSIPRO is not responsible for the risks undertaken when using the wheelchair as a seat in
public or private transportation.
Failure to follow these warnings may cause damage to your chair, a fall, tip-over or loss of
control and cause severe injury to the rider or others.
Two anchorage rings in the front
Figure 47: Transit use
42
XL5 / XL5 CI wheelchair
Figure 46: Folding the Back
A

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xl5 ci

Table of Contents