Owners manual
11.3 Angle and Depth Adjustable Footplates (optional)
Angle Adjustment
With a 5 mm Allen key, loosen screw A
1.
2.
Turn the footplate around the footrest mechanism to
adjust the footplate to desired angular position.
3.
Re-tighten once the adjustment is done.
Depth Adjustment
With a 5 mm Allen key, loosen screw A
1.
2.
For a depth adjustment, slide forward or
backward the footrest on its rail.
3.
Re-tighten once the adjustment is done.
11.4 Footplate Vertical Adjustment
Only available with the angle and depth adjustable footplates
1.
Position the Allen Key, at the opposite of the anchor block.
With a ¼" Allen key screw or unscrew the vertical adjustable screw A under
2.
the footplate.
Note - Screw the vertical adjustable screw A to decrease the angle B and
unscrew the screw A to increase the angle B.
A
Figure 35: Footplate Vertical Adjustment
B
33
ENGLISH
A
Figure 34: Footplates Adjustment
Revision 5
December 2015