XL5 / XL5 CI wheelchair
ENGLISH
8.8 Installation - Angle adjustable pushhandle (optional)
To install the pushhandle please follow these instructions:
1. Cut the extremities of the coating using a utility knife;
2. Using a 5 mm allen key insert bolt B in the connecting piece A to install it
into the back tube receiver;
3. Install the pushhandle into the connecting piece and screw bolt C Using a
3 mm allen key and a 8 mm closed-end wrench.
4. Once adjusted and inserted, tighten locking screws D to lock tube E.
Figure 27: Installation Angle adjustable pushhandle
28