Owners manual
13. Brakes
13.1 Push to lock brakes
Loosen screw A using a
1.
As needed, move the slider bar of brake B forward or backward;
2.
Tighten screw A.
3.
13.1.1 To Apply Brakes
1.
Push the handle forward to apply the brakes;
2.
Pull the handle backward to release the brakes.
Never stop a moving wheelchair with wheel locks.
Wheel locks are not brakes.
When breaks are applied, the breaking stop must sink into the tire
by
1/8 "
to ¼".
It is important to adjust the brakes if a modifications of the rear wheels
are done or if the tires are wore out.
3/16 "
wrench;
B
Figure 40 : Adjustment and Applying Brakes
37
A
ENGLISH
Revision 5
December 2015