Advertisement
Operation and Maintenance
5.4
Consumable
Operator needs to replace following parts. It is recommended to use abrasion counter on the operator
panel and schedule the replacement of parts. Parts to be replacement cycle are as follows.
The parts replacement procedures are described in the Operator's Guide.
No
Part name
1
Pad ASY
2
Pick roller
*1 These replacement cycle may be shortened depending on the paper scanned and bad scanner cleaning.
When carbon-less paper is used, the replacement cycle becomes short so these parts must be prepared
earlier than above.
*2
5-14
Table 5.6 Parts replacement
Part number
PA03951-0021
PA03951-0025
Figure 5.4 Pad ASY
Replacement cycle
Every 100,000 sheets or
annually *1
Every 200,000 sheets or
annually *1
Remarks
One per scanner
One set per scanner
(two rollers are in one set)
Advertisement
