Advertisement
Operation and Maintenance
5.2.2
Document setting on flatbed
The procedures for setting the document on ADF are as follows.
(1)
Open the document cover.
(2)
Place the document with face down on the document bed. Correct any curled or folded parts
of the document.
(3)
Position the long side (in landscape mode) or the short side (in portrait mode) of the
document to the left side of the document bed.
(4)
Position the left top corner of the document to the reference mark. If the document is not
placed correctly, scanned image position may be incorrect.
(5)
Close the document cover slowly.
(6)
Start the read operation. After reading, open the document cover and remove the document.
5-12
Operator panel
Advertisement
