Advertisement
Scanner Interface
Operation error occurs when the values of X
(#16, #17)] are more than the values shown below.
These values must be specified in binary in units of 1/400 inch.
Notes:
1.
When the picking is specified, only a specified area of the document is read. However, when the ADF is
used, and the document length is shorter than the specified area, read operation is stopped at the edge of
document.
2.
When the jam detection bit (control register #2) is "1", a setting of Y2 is ignored.
3.
Number of mainscanning bytes with respect to the resolution is as follows.
(#12, #13)
400
4.
Number of sub-scanning rasters with respect to the resolution is as follows.
(#16, #17)
400
Appendix A-34
+ X
1
X
+ X
1
2
4864
x α÷8
byte
x α
Raster
[(#10, #11) + (#12, #13)] and Y
2
Y
+ Y
1
2
6912
(Rounding up to the integer)
α indicates the output resolution
(Rounding up to the integer)
α indicates the output resolution
+ Y
[(#14, #15) +
1
2
Advertisement
