Advertisement
Operation and Maintenance
(4)
Place the documents on ADF paper chute as follows
a)
b)
c)
d)
NOTICE: The number of the documents to be placed on ADF paper chute is limited as described
5-10
Open the right and left guides of the ADF paper chute about 5 mm wider than the
document width
Place the documents with front side down onto ADF paper chute with the top edges
facing the ADF.
Adjusts the right and left guides to the document sides. Skewing may occur if there is a
gap between the guides and documents.
Slides the documents down until they touch the pick roller in the ADF. If the
documents hit the pick roller in ADF hard, two or more sheets may be fed at once.
Make sure that the upper end of documents are not turned.
in section 2.6.3.
Advertisement
