(4)
Equal to White
Equal to White specifies the result of binaizing when the value of a pixel equals the threshold.
The default is Equal to White OFF.
The effect of this parameter is slight but, if the scanned image text is bold, set to Equal to White.
If the scanned Image text is too narrow or lost, set to Equal to Black (Equal to White OFF).
Parameter
Equal to White ON
Equal to White OFF
Table 3.12 Parameter of Noise Removal
Control
Value
register No
B'xxxxxxx1'
A#4/B#4
B'xxxxxxx0'
3.3 Optional image function
Effect
Default
Equal to White
Equal to White ON
Equal to Black
3-17