Advertisement
Scanner Interface
A.3.4.7 Operation error
This response indicates that the error related to operation specification program occurs.
Byte 1
CNT
X'03'
Detailed information I
Detailed information I gives details on errors in command/response transmission and reception to
and from the host computer.
MSB
7
6
5
*1
Although standard paper size bit on control register A#5 is on (Bit 7 takes "1" and bit 6 takes "0"), the size
specifying bits (bits 0 to 4) are not defined.
Control register contents do not change even if the above errors are detected.
Appendix A-96
Byte 2
RPS
X'55'
Detailed error information I
LSB
4
3
2
1
0
0
0
The dither pattern or the overlay pattern r pattern not
registered was specified.
The bit or number of an undefined control register was
specified.
An operation was specified for a nonexistent option.
Read area specification error (*1)
An undefined command was received.
Command sequence error
Byte 3
TEXT
Advertisement
