Advertisement
Operation and Maintenance
(2)
Press "Next" button. Then the scanner displays "Mode select 0",
Reading mode change?
(3)
Press "Next" button. Then the scanner displays "Mode select 1",
Manual mode change?
M
(4)
Press "Next" button again. Then the scanner displays "Mode select 2"
Mode select 2
! Setup mode Change?
(5)
Press "Enter" button. Now the scanner is in Setup mode.
(6)
At first the screen is S41 in the screen flow chart next page. Select items by pressing "Next"
or "Previous" buttons, and select parameters by pressing "ç" or "è" buttons, and press
"Enter" button to set the parameter. Finally close the Setup mode by pressing "Exit" button.
The flow chart of the Setup mode is in Figure 5.3
5-6
Mode select 0
Mode select 1
Advertisement
