Advertisement
5.2
Document setting
5.2.1
Document setting on ADF paper chute
The procedures for setting the document on ADF are as follows.
NOTICE: Note that the documents follows section 2.6 "Document Specifications".
(1)
Pull up the ADF paper chute as follows:
hold the document feeder with one hand and pull up the ADF paper chute with the other
hand to set the shaft in position B.
ADF paper chute
(2)
Fan the document
Fan the document to loose static electricity and prevent double feed or jam.
(3)
Angle the document edges as follows to avoid double feed.
a)
b)
c)
Operating position
Lift the documents holding the both ends with both hands.
Hold the documents tightly with your left hand, and bend the documents as shown in
B.
Grip tightly with your right hand, loosen the grip of your left hand, and straighten the
documents as shown in C.
Rotation direction
Bar
5.2 Document setting
5-9
Advertisement
