BEC 8920AC User Manual page 81

Wireless 5G(wl0) & 2.4G(wl1) – WPS Example (AP as Enrollee)
Example: Wi-Fi Protected Setup (WPS) – Configure AP as Enrollee
Add Registrar with PIN Method
1. Set AP to "Unconfigured Mode" and Click "Config AP" button.
2. Launch the wireless client's WPS utility (e.g. Ralink Utility). Set the Config Mode as Registrar.
Enter the PIN number (13076542 (device) for example) in the PIN Code column then choose the
correct AP (e.g. wlan-ap-2.4g) from the WPS AP List section before pressing the PIN button to run the
scan.
3. The router's (AP's) SSID and security setting will now be configured to match the SSID and
security setting of the registrar.
BEC 8920AC User Manual
Configuring Your Router
70