DSL
This screen allows you to set DSL parameters. DSL knowledge is required to configure these settings.
Contact your ISP to make sure that these parameters are correct.
Modulation:
There
"AnnexL", "ADSL2+","AnnexM", and "VDSL" to choose from. Please consult with your Internet
Service Provider if you don't what mode to choose.
Profile: VDSL profiles up to 30a.
Phone line pair: This is for reserved only. You can choose "Inner Pair" or "Outer Pair".
US0: Enable to improve rate performance and extend the reach distance of VDSL2.
Capability: There are 2 options "Bitswap Enable" and "SRA Enable" that user can select for this
connection.
Bitswap: Enable to activate bitswaping function.
SRA: Enable to activate seamless rate adaptation.
PhyR: A new technology to control impulse and noise to improve the BER and DSL data quality.
Click Apply to save settings.
BEC 8920AC User Manual
are
8
modes
available,
Configuring Your Router
"G.Dmt",
"G.lite",
115
WAN – DSL
"T1.413",
"ADSL2",