Cabling - BEC 8920AC User Manual

Product Overview
11

Cabling

Cabling
The most common problem associated with Ethernet is bad cabling. Check the LAN and WAN LEDS
to see if they are lit and make sure that all connected devices are turned on and cables are connected
properly. Please contact your Internet Service Provider for further support if problems persist.
Make sure a line filter is installed before connecting devices (e.g. telephones, fax machines, analogue
modems) to the telephone line on the wall socket (unless you are using a Central Splitter or
Central Filter installed by a qualified and licensed electrician). Missing or wrong installation of a line
filter can cause xDSL frequent disconnection.
If you have a back-to-base alarm system, please consult with your Security provider to see if any
necessary changes are required.
BEC 8920AC User Manual