Wireless 5G(wl0) & 2.4G(wl1) – WPS Example (AP as Registrar)
Example: Wi-Fi Protected Setup (WPS) – Configure AP as Registrar
Add Enrollee with PIN method
1. Select radio button "Enter STA PIN".
2. Input PIN from Enrollee Station (16837546 in this example), Or else users can alternatively enter
the authorized station MAC Help: it is to help users to understand the concept and correct
operation.
3. Click
Using PIN from the Enrollee Station
Using MAC address of the Enrollee Station
4. In the wireless client's WPS utility (e.g.Ralink Utility), set the Config Mode as Enrollee, press the
WPS button on the top bar, select the AP (e.g. Wlan-ap-2.4g) from the WPS AP List column. Then
press the PIN button located on the middle left of the page to run the scan.
BEC 8920AC User Manual
.
Configuring Your Router
68