BEC 8920AC User Manual page 118

No Multicast VLAN Filter: Enable to deactivate multicast filtering. All multicast packets will be
forwarded to all ports in the relevant VLANs.
MLD Multicast Proxy (for IPv6): check whether to enable this function. MLD (Multicast Listener
Discovery Protocol) Proxy intercepts the MLD request from Clients a set up the multicast-forwarding
table. It takes over some of the router's job, simplifying the router's job and multicast communication.
Support MLDv1 and MLDv2.
MLD Multicast Source (for IPv6): Enable to deliver multicast packets from a specific source to the
interested clients. . (Only available in IGMPv3)
MTU: Maximum Transmission Unit, the size of the largest datagram (excluding media-specific
headers) that IP will attempt to send through the interface.
MAC Spoofing: This option is required by some service providers specifying some specific MAC
allowed for joining network. You must fill in the MAC address specified by your service provider when
this information is required.
Click Next to continue to set the default gateway and DNS for IPv4 and IPv6.
Default Gateway
 IPv4
Click the appropriate default gateway interface for this WAN service from Available Routed WAN
Interface box then using the left-arrow sign () to move it to the Selected Default Gateway
Interface box.
BEC 8920AC User Manual
Configuring Your Router
WAN – EWAN Connection Setup (IPoE)
107