Mac Filtering - BEC 8920AC User Manual

MAC Filtering

MAC Filtering is only effective on ATM PVCs configured in Bridged mode.
 FORWARDED: All MAC layer frames will be forwarded except those matching with any of the
specified rules in the following table.
 BLOCKED: All MAC layer frames will be blocked except those matching with any of the
specified rules in the following table.
By default, all MAC frames of the interface in Bridge Mode will be forwarded; you can check Change
checkbox and then press Change Policy to change the settings to the interface.
For example, from above, the interface atm0.1 is of bridge mode and all the MAC layer frames will be
forward, but you can set some rules to let some item matched the rules to be blocked.
Click Add button to add the rules.
Protocol type: Select from the drop-down menu the protocol that applies to this rule.
Destination /Source MAC Address: Enter the destination/source address.
Frame Direction: Select the frame direction this rule applies, both LAN and WAN: LAN <=>WAN,
only LAN to WAN: LAN=>WAN, only WAN to LAN: WAN=>LAN.
WAN Interfaces: Select the interfaces configured in Bridge mode.
BEC 8920AC User Manual
Configuring Your Router
Security – MAC Filtering
132