Dmz Host - BEC 8920AC User Manual

DMZ Host

The DMZ Host is a local computer exposed to the Internet. When setting a particular internal IP
address as the DMZ Host, all incoming packets will be checked by Firewall and NAT algorithms before
being passed to the DMZ host, when a packet received does not use a port number used by any other
Virtual Server entries.
DMZ Host IP Address: Enter the IP Address of a host you want it to be a DMZ host. Select from the
list box to quick set the DMZ.
Time Schedule: Select or set exactly when the DMZ works. When set to "Always On", the DMZ will
work all time; and also you can set the precise time when DMZ works, like 01:00 of Sun to 19:00 of
Friday. Or you can select the already set timeslot in Time Schedule during which the DMZ works. And
when set to "Disable", the rule is disabled. See
Exceptional Rule Group: Select an exceptional group from the list. It is to grant or block NAT access
to a group of IPs. Example, if we had Group_1, in the Exceptional Rule Group section, configured to
block an IP range, 172.16.1.102-172.16.1.106, from accessing to the DMZ.
Using port mapping does have security implications, since outside users are able
to connect to PCs on your network. For this reason you are advised to use specific
Virtual Server entries just for the ports your application requires instead of simply
using DMZ or creating a Virtual Server entry for "All" protocols, as doing so results
in all connection attempts to your public IP address accessing the specified PC.
If you have disabled the NAT option in the WAN-ISP section, the Virtual Server
function will hence be invalid.
If the DHCP server option is enabled, you have to be very careful in assigning the
IP addresses of the virtual servers in order to avoid conflicts. The easiest way of
configuring Virtual Servers is to manually assign static IP address to each virtual
server PC, with an address that does not fall into the range of IP addresses that
are to be issued by the DHCP server. You can configure the virtual server IP
Attention address manually, but it must still be in the same subnet as the router.
BEC 8920AC User Manual
Configuring Your Router
Time Schedule.
NAT – DMZ Host
152