BEC 8920AC User Manual page 103


xDSL Internet Protocol - IP over Ethernet
VCP/VPI (For ATM Mode only): Enter the VCI/VPI from you Internet Service Provider (ISP). This
information should be provided by your ISP, please consult them for more information.
Encapsulation Mode (For ATM Mode only): Select the encapsulation mode, LLC/SNAP-BRIDGING,
or VC/MUX. This information should be provided by your ISP, please consult them for more
information.
Description: User-defined description for the connection, commonly for friendly use.
802.1P Priority: The parameter indicates the frame priority level from 0 (lowest) to 7 (highest), which
can be used to prioritize different classes of traffic (voice, video, data, etc). Enter the priority
identification, tagged: 0-1, untagged: -1.
802.1Q VLAN ID: It is a parameter to specify the VLAN which the frame belongs. Enter the VLAN ID
identification, tagged: 0-4094, untagged: -1.
Here two modes are supported for users to deal with the IP and DNS. You can select obtain
automatically or manually input the information according to your ISP.
WAN IP Address
 IPv4 – Automatic
Obtain an IP address automatically: Enable to receive a WAN (public) IP address from your
Internet Service Provider. This information should be provided by your ISP, please consult
them for more information.
BEC 8920AC User Manual
WAN – xDSL WAN Connection Setup (IPoE)
Configuring Your Router
92