Wireless 5G (Wl0) & 2.4G (Wl1); Basic - BEC 8920AC User Manual

Configuring Your Router
60
Wireless 5G(wl0) & 2.4G(wl1) – Basic
Wireless 5G (wl0) & 2.4G (wl1)
BEC 8920AC is a simultaneous dual-band (2.4G and 5G) wireless router support 11b/g/n/a/ac
wireless standards. It allows multiple wireless users in 2.4G and 5G radio bands to surf the Internet,
checking e-mail, watching video, listening to music over the Internet concurrently.
You can choose the optimum radio band wireless connection base on your environment.

Basic

Click Enable then Apply to activate the Wireless.
Wireless: Default setting is set to Enable. If you do not have any wireless devices, check the
checkbox again to unselect.
Hide SSID: It is function in which transmits its SSID to the air so that when wireless client searches for
a network, router can then be discovered and recognized. Check the checkbox to determine whether
you want to hide SSID.
Clients Isolation: if you enabled this function, then each of your wireless clients will not be able to
communicate with each other.
Disable WMM Advertise: Stop the router from 'advertising' its Wireless Multimedia (WMM)
functionality, which provides basic quality of service for time-sensitive applications (e.g. VoIP, Video).
Check to disable or enable this function.
Wireless multicast Forwarding (WMF): check to enable or disable wireless multicast forwarding.
SSID: The SSID is the unique name of a wireless access point (AP) to be distinguished from another.
For security purpose, change the default wlan-ap-2.4g to a unique ID name to the AP already built-in
to the router's wireless interface. It is case sensitive and must not excess 32 characters. Make sure
your wireless clients have exactly the SSID as the device, in order to get connected to your network.
Note: SSID is case sensitive and must not exceed 32 characters.
BEC 8920AC User Manual