BEC 8920AC User Manual page 139

Configuring Your Router
128
Security – IP Filtering Outgoing
port range is to be blocked from going through the router. Default is set port from port range: 1 –
65535.
Time Schedule: Select or set exactly when the rule works. When set to "Always On", the rule will work
all time; and also you can set the precise time when the rule works, like 01:00 of Sun to 19:00 of Friday.
Or you can select the already set timeslot in "Time Schedule" during which the rule works. And when
set to "Disable", the rule is disabled or inactive and there will be an icon" " in list table indicating
the rule is inactive. See Time Schedule.
Log: check the check-box to record the security log. To check the log, users can turn to Security Log.
Example: For example, if there is an outgoing rule set as follows, then the 21 application between
source IP and destination IP will be blocked. Or exactly in the rule below, all traffic trying to access
FTP will be blocked.
(The rule is active; disable field shows the status of the rule, active or inactive)
BEC 8920AC User Manual