BEC 8920AC User Manual page 187

Configuring Your Router
176
Advanced Setup – UPnP (Example)
Step 6: Double-click on the icon to display your current Internet connection status.
Web Configurator Easy Access
With UPnP, you can access web-based configuration for the BEC 8920AC without first finding out the
IP address of the router. This helps if you do not know the router's IP address.
Follow the steps below to access web configuration.
Step 1: Click Start and then Control Panel.
Step 2: Double-click Network Connections.
Step 3: Select My Network Places under Other Places.
Step 4: An icon describing each UPnP-enabled device shows under Local Network.
Step 5: Right-click on the icon of your BEC 8920AC and select Invoke. The web configuration login
BEC 8920AC User Manual