Chapter 6: Troubleshooting; Problems With The Router; Problem With Lan Interface - BEC 8920AC User Manual

C
HAPTER
If your Router is not functioning properly, you can refer first to this chapter for simple troubleshooting
before contacting your service provider support. This can save you time and effort but if symptoms
persist, consult your service provider.

Problems with the Router

Problem
None of the LEDs is on when you turn
on the router
You have forgotten
username or password

Problem with LAN Interface

Problem
Cannot PING any PC on LAN
BEC 8920AC User Manual
6: T
ROUBLESHOOTING
your login
Suggested Action
Check the connection between the router and the
adapter. If the problem persists, most likely it is due
to the malfunction of your hardware. Please contact
your service provider or BEC for technical support.
Try the default username "admin" and password
"admin". If this fails, you can restore your router to its
factory settings by pressing the reset button on the
device rear side.
Suggested Action
Check the Ethernet LEDs on the front panel.
The LED should be on for the port that has a PC
connected. If it does not lit, check to see if the cable
between your router and the PC is properly
connected. Make sure you have first uninstalled your
firewall program before troubleshooting.
Verify that the IP address and the subnet mask are
consistent for both the router and the workstations.
Troubleshooting
196