BEC 8920AC User Manual page 161

 Start: Enter a port number as the internal staring number.

End: Here it will generate automatically according to the End port number of External port and
can't be modified.
Protocol: select the protocol this service used: TCP/UDP, TCP, and UDP.
Time Schedule: Select or set exactly when the Virtual Server works. When set to "Always On", the
Virtual Server will work all time; and also you can set the precise time when Virtual Server works, like
01:00 of Sun to 19:00 of Friday. Or you can select the already set timeslot in Time Schedule during
which the Virtual Server works. And when set to "Disable", the rule is disabled and there will be an icon
in the list table indicating the rule is disabled. See
Example: How to create and delete a Virtual Server rule
1. Select a Server Name from the drop-down menu, then the port will automatically appear, modify
some as you like, or you can just leave it as default. Remember to enter your server IP Address.
If Server Name does not contain the application you are looking for. You may manually create a rule
of your own by specifying the Server IP Address, External Port, and Internal Port.
Click Apply to save the settings.
This new rule will be listed in the Virtual Servers Setup table.
( Means the rule is currently inactive)
BEC 8920AC User Manual
Configuring Your Router
NAT – Virtual Servers
Time Schedule.
150