Dsl Bonding; Snr - BEC 8920AC User Manual

DSL Bonding

This feature allows you to double your ADSL or VDSL data rate. Contact your ISP to see if you can
upgrade your Internet service in order to use this feature
xDSL Bonding Capability: To enable or disable the xDSL bonding feature.
 Enable: The device will attempt to make connection in two-pair xDSL bonding mode.
 Disable: The device will only make a connection in single-pair xDSL mode.
Current WAN xDSL Mode: This displays your current xDSL connection mode on the DSLAM/ISP.
 Bonded: two-pair xDSL bonding is available.
 Non-Bonded: single-pair xDSL is available.
Click Apply/Reboot to save settings then reboot the system to activate the changes.

SNR

Signal-to-noise ratio (often abbreviated SNR or S/N) is a measure used in science and engineering
that compares the level of a desired signal to the level of background noise. It is defined as the ratio of
signal power to the noise power.
SNR: Change the value to adjust the DSL link rate, more suitable for an advanced user.
BEC 8920AC User Manual
Configuring Your Router
WAN - DSL Bonding & SNR
116