Default Settings - BEC 8920AC User Manual

Default Settings

Before configuring the router, you need to know the following default settings.
Web Interface: (Username and Password)
Username: admin
Password: admin
The default username and password are "admin" and "admin" respectively.
If you ever forget the username/password to login to the router, you may
press the RESET button up to 6 seconds then release it to restore the
factory default settings.
Caution: After pressing the RESET button for more than 6 seconds then release it, to be
Attention
sure you power cycle the device again.
Device LAN IPv4 Settings
IP Address: 192.168.1.254
Subnet Mask: 255.255.255.0
Device LAN IPv6 settings
IPv6 Address / prefix: Default is a link-local address and is different from each other as MAC address
is different from one to one.
For example: fe80:0000:0000:0000:0204:edff:fe01:0001 / 64, the prefix initiates by fe80::
DHCP IPv4 Server:
DHCP server is enabled.
Start IP Address: 192.168.1.100
IP pool counts: 100
BEC 8920AC User Manual
Basic Installation
Default Settings
28