Brake Fluid Filling - DAELIM Roadwin R Service Manual

HYDRAULIC BRAKE
BLEEDER HOSE
BLEEDER HOSE BLEEDER HOSE BLEEDER HOSE BLEEDER HOSE
BLEEDER HOSE BLEEDER HOSE BLEEDER HOSE BLEEDER HOSE BLEEDER HOSE BLEEDER HOSE
BLEEDER HOSE BLEEDER HOSE
BLEEDER HOSE BLEEDER HOSE BLEEDER HOSE
BLEEDER HOSE
16-4
Connect a bleeder hose to the caliper bleeder valve.
Loosen the bleeder valve and pump the brake lever or
pedal.
Stop pumping the lever or pedal when no more fluid
flows out of the bleeder valve.

BRAKE FLUID FILLING

Fill the reservoir with DOT3 or DOT4 brake fluid up
to the upper level.
Do not mix different types of fluid. There are not
compatible.
Connect a recommended brake bleeder to the bleeder
valve.
Pump the brake bleeder and loosen the bleeder valve,
adding fluid when the fluid level in the master cylinder
reservoir is low.
Repeat the previous step procedures until air bubbles
do not appear in the plastic hose.
If a brake bleeder is not available, fill the master
cylinder and operate the brake lever or pedal to
fill the system.
Tighten the bleeder valve.