CLUTCH/GEARSHIFT
8-10
Install the lock nut by pressing clutch center into
the clutch center holder.
TORQUE : 6.5kgf m (65N m)
TOOLS :
CLUTCH CENTER HOLDER
LOCK NUT WRENCH
EXTENSION BAR
Install the bearing.
PRIMARY DRIVE GEAR
REMOVAL
Remove the R. crankcase cover.
Hold the flywheel using a flywheel holder, and
remove the primary drive gear lock nut.
TOOLS:
FLYWHEEL HOLDER
LOCK NUT WRENCH
EXTENSION BAR
Remove the lock washer, primary drive gear and
water pump drive gear.