Connect the overflow tube and secure with the tube
clamp.
Fill the radiator with coolant.
Connect the vent tube to the radiator filler.
After installation, check for coolant leaks.
Install the RH/LH side cowl and center cowl.
WATER PUMP
MECHANICAL SEAL (WATER SEAL)
INSPECTION
Inspect the telltale hole for signs of mechanical
seal coolant leakage.
If the mechanical seal is leaking, remove the right
crankcase cover and replace the mechanical seal.
WATER PUMP / IMPELLER REMOVAL
Remove the coolant inlet hose.
COOLING SYSTEM
6-7