Thermostat Inspection; Thermostat Installation - DAELIM Roadwin R Service Manual

THERMOSTAT
INSPECTION
THERMOMETER
Technical data
INSTALLATION
COOLING SYSTEM
Suspend the thermostat in a pan of water over a burner
and gradually raise the water temperature to check its
operation.
Begins to open
Full-open
Valve lift
Do not let the thermostat touch the pan as it will
give a false reading.
Replace the thermostat if the valve stays open at
room temperature.
Test the thermostat after it is opened for about 5
minutes and hold the temperature at 70
Install in the reverse order of removal.
Replace the O-ring with a new one and apply
grease to it.
80 2
90
3.5~4.5mm
6-11