Cylinder Head Removal - DAELIM Roadwin R Service Manual

CYLINDER HEAD / VALVES
10-4
Check the cam lobes of the camshaft for wear or
damage.
Measure the height of the cam lobe.
SERVICE LIMIT : IN : 37.110 mm
EX: 36.870 mm
Take precautions not to allow the cam chain to drop
into the crankcase.
Manually turn the camshaft bearing outer race, and
check if it turns smoothly.
Check the bearing for wear or damage.
CYLINDER HEAD
REMOVAL
Remove the cylinder head cover
Remove the camshaft.
Remove the cylinder head special socket nut(M8)
Remove the cylinder head from the cylinder.
Remove the throttle body insulator.
Remove the cylinder head gasket, dowel pins and
cam chain guide from the cylinder.