Cylinder Head Removal - DAELIM ROADWIN VJ125 Service Manual

CAMSHAFT BEARINGS
CAM CHAIN GUIDE CAM CHAIN GUIDE CAM CHAIN GUIDE CAM CHAIN GUIDE CAM CHAIN GUIDE
CAM CHAIN GUIDE CAM CHAIN GUIDE CAM CHAIN GUIDE CAM CHAIN GUIDE CAM CHAIN GUIDE CAM CHAIN GUIDE
CAM CHAIN GUIDE CAM CHAIN GUIDE CAM CHAIN GUIDE CAM CHAIN GUIDE
CAM CHAIN GUIDE CAM CHAIN GUIDE CAM CHAIN GUIDE
CYLINDER HEAD / VALVES
Check the cam lobes of the camshaft for wear or
damage.
Measure the height of the cam lobe.
SERVICE LIMIT : IN : 37.110 mm
EX: 36.870 mm
Manually turn the camshaft bearing outer race, and
check if it turns smoothly.
Check the bearing for wear or damage.
Be sure to check the valve clearance.
CYLINDER HEAD
REMOVAL
Remove the engine from the frame. (section 6)
Remove the camshaft. ( 9-3)
Remove the cylinder head from the cylinder.
Remove the gasket, dowel pins and cam chain
guide from the cylinder.
9-5