If Engine Cannot Be Started; Gear Shifting - DAELIM DAYSTAR FI Owner's Manual

STARTING THE ENGINE
5. Close throttle grip and press starter
button.
6. If engine is not started with throttle grip
closed, press starter button and open
throttle grip approximately 1/8 to 1/4.
7. Verify side stand is positively in
original position and start slowly.
1/8
1/4
18
CAUTION
●Exhaust gas contains harmful
substance such as
monoxide. Start engine in well-
ventilated places.
●If engine is not started within 3
seconds after starter button is
pressed, wait for approximately 10
seconds and retry. This is to
recover battery voltage.
●Do not run engine idle unreaso-
nably. This not only wastes fuel
but also adversely affects engine.
●If starter button is pressed without
disengaging clutch, motorcycle
may bring out to fall. Make sure
gear is in neutral position or
disengage clutch prior to starting
engine.

IF ENGINE CANNOT BE STARTED

If engine cannot be started or vehicle does
not move, check the followings.
carbon
●Is there fuel in fuel tank?
●Are you operating in accordance with the
instructions given in owner's manual?
●Is fuse not cut?
●Is starter motor running?
●If starter motor is not running due to
battery consumption, charge the battery.
●If the MIL blinks continously when the
main key is on, contact daelim dealer.

GEAR SHIFTING

Gear is shifted in 5-shift return system as
shown on the right side drawing.
●Close throttle grip and hold clutch lever
perfectly, and shift gear.
●Touch pedal lightly with foot and shift
gear perfectly until you hear "Click" at
the pedal. If you apply excessive force
when shifting gear, transmission may be
damaged.