Installing Optional Components; Connecting The Cords And Cables - Sun Microsystems Fire V445 Installation Manual

Installing Optional Components

●
Install any optional components shipped with your system.
If you ordered options that are not factory-installed, see the Sun Fire V445 Server
Service Manual for installation instructions.
Note – All internal components except disk drives, DVD drive, power supplies, fan
trays, and PCI cards must be installed by qualified service technicians only.
Caution – Place components on an antistatic surface, such as a Sun antistatic
discharge mat, an antistatic bag, or a disposable antistatic mat, to protect electronic
components from electrostatic damage.
Caution – Always wear an antistatic wrist strap connected to a metal surface on the
chassis when you work on system components.

Connecting the Cords and Cables

Note – Do not connect the system power cords until after you establish a connection
to the serial management port. See Chapter 3 for power-on instructions.
24 Sun Fire V445 Server Installation Guide • November 2006