Alternate Trigger - Rigol DS1074B User Manual

RIGOL
Trigger Sensitivity
Trigger Level Range
Trigger Level Accuracy
(typical) applicable for
the signal of rising and
falling time ≥20ns
Trigger Offset
Trigger Holdoff range
HF Rejection
LF Rejection
Set Level to 50%
(typical)
Edge Trigger
Edge trigger slope
Pulse Trigger
Trigger condition
Pulse Width range
Video Trigger
Video standard & line
frequency
Pattern Trigger
Pattern setup

Alternate Trigger

Trigger on CH1, CH2,
CH3, CH4
Measurements
Cursor
5-4
0.1div-1.0div (adjustable)
Internal ±6 divisions from center of screen
EXT ±1.2V
EXT/5 ±6V
Internal ±(0.3div × V/div)(±4 divisions from
center of screen)
EXT ±(6% of setting + 40 mV)
EXT/5 ±(6% of setting + 200 mV)
Normal mode: pre-trigger(storage depth/(2×sampling)
rate), delayed trigger 1s
Slow Scan mode: pre-trigger 6div, delayed trigger 6div
100ns~1.5s
100kHz ±20%
10kHz ±20%
Input signal frequency ≥50Hz
Rising, Falling, Rising + Falling
(＞, ＜, =) Positive pulse, (＞, ＜, =) negative pulse
20ns ~10s
Support standard NTSC, PAL and SECAM broadcast
systems. Line number range: 1~525 (NTSC) and 1~625
(PAL/SECAM)
H, L, X, ,
Edge, Pulse, Video
Manual Voltage difference between cursors (∆V)
Time difference between cursors (∆T)
Reciprocal of ∆T in Hertz (1/∆T)
Track Voltage value for Y-axis waveform
User's Guide for DS1000B Series