Waveform Recorder - Rigol DS1074B User Manual

RIGOL

Waveform Recorder

Waveform recorder records input waveforms from CH1, CH2, CH3 and CH4 with a
maximum record length of 800 frames. This performance can also be activated by
the Pass/Fail test, which makes this function especially useful to capture abnormal
signals in long term without keeping an eye watching it.
1. OFF: It will close all record functions.
2. Record: To record waveform by selected time interval till the last frame.
Press Utility→Record→Mode→Record to go to the following menu.
Figure 2-107 Table 2-61 The Record menu (Page 1/2)
Menu
Mode
Source
End Frame
Operate
NOTE [1]: The waveform when Pass/Fail testing pass or fall.
2-80
Settings Comments
OFF Select record mode.
Record Select play back mode.
Play back Select storage mode.
Storage Turn off all recorder functions.
CH1, CH2
CH3, CH4 Select record source channel.
[1]
P/F-OUT
Set number of record frames.
<1-800>
Record stopped, press to Start
(Run)
recording.
(Stop) Press to stop recording.
User's Guide for DS1000B series