To Set Up The Horizontal System - Rigol DS1074B User Manual

RIGOL

To Set up the Horizontal System

Press MENU button to enter the horizontal setting system.
Figure 2-35 Table 2-20 The Horizontal menu
Menu
Delayed
TimeExpand
Time Base
Trig-Offset
NOTE:
[1] In Roll mode, both the horizontal
Once the oscilloscope is set to Roll mode, the time base should be 50ms or slower.
2-28
Settings Comments
ON Turn on the Delayed Scan mode.
OFF Turn off the Delayed Scan mode.
The waveform expands or compresses
horizontally around the center of the
screen when the horizontal time base
ScreenCenter
is changed.
The waveform expands or compresses
horizontally around the trigger point
Trigger
when the horizontal time base is
changed.
The waveform expands or compresses
User
horizontally around the user-defined
reference position when the horizontal
time base is changed.
Y-T Show the relative relation between
vertical voltage and horizontal time.
X-Y Show CH1 amplitude value at X axis;
show CH2 amplitude value at Y axis.
[1]
Roll In Roll Mode, the waveform display
updates from right to left.
Adjust the trigger position to the
Reset
center of the memory.
knob and trigger control are inoperative.
User's Guide for DS1000B series