To Measure Automatically - Rigol DS1074B User Manual

RIGOL

To Measure Automatically

The Measure button in the menu area activates the automatic measurement function.
The instruction below shows the powerful measurement function of DS1000B series
oscilloscopes.
The oscilloscopes provide 22 auto measurements: Vpp, Vmax, Vmin, Vtop, Vbase,
Vamp, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time,Delay A
 B , Delay A  B , Phase A  B , Phase A  B , +Width, -Width, +Duty, -Duty
(10 voltage and 12 timing measurements).
Press the Measure button to display the menu of the Automatic Measurements
settings.
Figure 2-127 Table 2-75 The Measure menu (Page 1/2)
Menu
Source
Voltage
Time
Clear
2-92
Auto Measurement
Figure 2-126
The Measure setup button
Settings Comments
CH1, CH2, Select CH1 or CH2 as source channel for
CH3, CH4 measurement.
Select measure voltage parameter.
Select measure time parameter.
Clear measurement result on screen.
User's Guide for DS1000B series