Print Setting - Rigol DS1074B User Manual

RIGOL

Print Setting

DS1000B series oscilloscopes support two print modes: "normal" and "PictBridge".
Please execute print operation according to the following steps:
1. Connect printer:
If use PictBridge printer, please select "PictBridge" mode, and then connect

the oscilloscopes regarded as "Device equipment" and printer via USB Device
port on the rear panel.
If use Normal printer, please select "Normal" mode, and then connect the

oscilloscopes regarded as "Host equipment" and printer via USB Host port on
the front panel.
2-84
40
C US
Digital Oscilloscope
100-127V, 45-440Hz
100-240V , 45-65Hz
LINE 60W MAX F use: 250V , 2A T
RIGOL Technologies, Inc.
LXI Class C
Non Auto-MDIX
USB
LAN
DEVICE
USB
HOST
MADE IN CHINA
Figure 2-114 PictBridge print
Figure 2-115 Normal print
Single
Measure Acquire Storage Auto
Intensity
Display Utility
Cursor SCALE POSITION
QUICK
MENU
Measure Print Zoom
Help
POSITION POSITION POSITION POSITION
Auto
MODE
Normal
Single
LEVEL
Zero Zero Zero Zero
CH1 CH2 CH3 CH4
Zero
MATH REF
SCALE SCALE SCALE SCALE
MENU
FORCE
50%
CH1 CH2 CH3 CH4
// 8
300 V RMS
User's Guide for DS1000B series