The I/O Setup - Rigol DS1074B User Manual

RIGOL

The I/O Setup

Press Utility→IO Setting to go to the following menu.
Figure 2-88 Table 2-54 The I/O Setup menu
Menu
LAN Set
USB
Device
GPIB#
NOTE:
[1] If the instrument connection switches from "Computer" (or PictBridge printer)
into PictBridge printer (or Computer), you should set the type of USB Device
manually, to ensure a same connection type between instruments under use.
2-68
Display
Auto Detect
Computer
[1]
PictBridge
0~30
Comments
Set network function, the local area
network interface corresponds with the
LXI standard.
Set USB device function, connect USB
interface to the needed device.
Set the GPIB address.
User's Guide for DS1000B series