Alternate Trigger - Rigol DS1000D series User Manual

RIGOL
Delta Volts
Measurement
Accuracy (Average
Acquisition Mode)
Trigger
Trigger Sensitivity
Trigger Level Range
Trigger
Accuracy (typical)
applicable for
signal of rising and
falling time ≥20ns
Trigger Offset
Trigger Holdoff range
Set Level to 50%
(Typical)
Edge Trigger
Edge trigger
slope
Pulse Trigger
Trigger condition
Pulse Width range 20ns ~10s
Video Trigger
Video standard &
line frequency
Slope Trigger
Trigger condition
Time setting

Alternate Trigger

Trigger on CH1
Trigger on CH2
Pattern Trigger
5-4
Add 50mV for settings from >200mV/div to 10V/div
Delta Volts between any two averages of 16 waveforms
acquired under same setup and ambient
conditions: ± (DC Gain Accuracy× reading + 0.05 div)
0.1div~1.0div (adjustable)
Internal
EXT
Level Internal
the
EXT
Normal mode: pre-trigger (262144/ sampling rate),
delayed trigger 1s
Slow Scan mode: pre-trigger 6div, delayed trigger 6div
100ns~1.5s
Input signal frequency ≥50Hz
Rising, Falling, Rising + Falling
(＞, ＜, =) Positive pulse, (＞, ＜, =) negative pulse
Support standard NTSC, PAL and SECAM broadcast systems.
Line number range: 1~525 (NTSC) and 1~625 (PAL/SECAM)
(＞, ＜, =) Positive slope, (＞, ＜, =) negative slope
20ns~10s
Edge, Pulse, Video, Slope
Edge, Pulse, Video, Slope
[1]
User's Guide for DS1000E, DS1000D Series
± 5 divisions from center of screen
± 1.2V
± (0.3div × V/div)(± 4 divisions from center of
screen)
± (6% of setting + 200 mV)
© 2008 RIGOL Technologies, Inc.