Trigger Settings - Rigol DS1074B User Manual

RIGOL

Trigger Settings

Set up different trigger settings according to different trigger modes. In Edge, Pulse
and Pattern trigger modes. You need to set up coupling, sensitivity and trigger
holdoff; in video trigger mode, to set up sensitivity and holdoff; in alternate trigger,
different trigger types have different setting options.
Figure 2-55 Table 2-34 The Trigger Set Up menu
(Page 1/2 Settings for Edge, Pulse and Pattern Triggers)
Menu
Coupling
HF reject
Sensitivity
Holdoff
2-44
Settings
DC
AC
LF Reject
ON
oFF
<Sensitivity Setting>
<Holdoff Setting>
Comments
Allow all signals pass.
Block DC signals.
Reject DC and low frequency
signals.
Passes high frequency
component.
Blocks high frequency
component, passes low
frequency component.
Set trigger sensitivity between
0.1div to 1.00div.
Set time slot before another
trigger event between 100ns
to 1.5s.
User's Guide for DS1000B series