Installation; Prepare For Installation - RLE Technologies LD5200 User Manual

2.1

Prepare for Installation

Before you install or troubleshoot equipment, always check the RLE website first to ensure
you're working with the most recent version of our documentation.
To install the LD5200, you'll need the following supplies:
Included with the LD5200
♦
Wall mount kit
♦
Cross-over cable (blue with yellow ends)
♦
15 foot (4.57m) leader cable
♦
End-of-line terminator (EOL)
Available from RLE, sold separately
♦
SeaHawk Sensing Cable, up to 10,000 feet (3048m) of cable with a resistance of 2.800
ohms per foot, or up to 7,000 feet (2134m) of cable with a resistance of 4.000 ohms per
foot.
♦
Non-sensing cable
♦
J-Clips
Information Required
Consult with your IT administrator to determine the following network settings for the
LD5200:
♦
IP address
♦
Subnet mask
♦
Default gateway
rletech.com LD5200 User Guide
C
H A P T E R
I
NSTALLATION
C 0
HAPTER
15