Electrical Installation; Hazard - Emerson Unidrive M400 User Manual

Safety Product Mechanical
information information installation
1.11

Electrical installation

1.11.1 Electric shock risk
The voltages present in the following locations can cause severe electric
shock and may be lethal:
AC supply cables and connections
Output cables and connections
Many internal parts of the drive, and external option units
Unless otherwise indicated, control terminals are single insulated and
must not be touched.
1.11.2 Stored charge
The drive contains capacitors that remain charged to a potentially lethal
voltage after the AC supply has been disconnected. If the drive has been
energized, the AC supply must be isolated at least ten minutes before
work may continue.
1.12

Hazard

1.12.1 Falling hazard
The drive presents a falling or toppling hazard. This can still cause injury
to personnel and therefore should be handled with care.
Maximum weight:
Size 2: 1.3 kg (3lb).
8
Electrical Getting Basic Running
installation started parameters the motor
NV Media Card Onboard
Optimization
Operation PLC
Advanced
Technical data Diagnostics
parameters
Unidrive M400 User Guide
Issue Number: 2
UL listing
information