Emerson Unidrive M400 User Manual page 19

Safety Product Mechanical Electrical Getting Basic Running NV Media Card Onboard Advanced UL listing
Optimization Technical data Diagnostics
information information installation installation started parameters the motor Operation PLC parameters information
NOTE
The drives shown in Figure 3-3 on page 18 above, have a single removable terminal cover which provides access to all electrical connections, i.e.
Control, AC, Motor and Brake functions. Figure 3-4 on page 19 illustrates the three steps required to remove the drive terminal covers.
Figure 3-4 Removing the terminal cover
1
2
3
1. Using a flat bladed screwdriver, turn the terminal cover locking clip anti-clockwise by approximately 30°
2. Slide the terminal cover down
3. Remove terminal cover
19
Unidrive M400 User Guide
Issue Number: 2